Paper
26 February 2004 High-efficiency IR transmission gratings (GRISM) engraved into substrate
Geraud de Villele, Francis Bonnemason, Christian Brach, Jean Flamand, John R Gilchrist, Bruno Touzet, Robert Grange, Bruno Milliard
Author Affiliations +
Abstract
In Astronomy field, grisms or transmission gratings replicated on a prism are widely used to transmit in line the spectrum. To work in the infrared range, classical grisms present important limitations: the epoxy layer, necessary for replication, absorbs IR light, and in addition this layer constitutes a problem when instrument is used at low temperature. Jobin-Yvon company, in collaboration with LAM in Marseille, France, designed and manufactured a transmission grating engraved directly into IR fused silica substrate. The transmission efficiency of the manufactured grating is 60% to 70% in natural light over the 1.5 to 2.5 microns wavelength range. The number of grooves was 400 g/mm. Other wavelength ranges are possible with similar efficiency, for example: 1.0 to 1.4 microns or 1.4 to 1.9 microns. This grating made only only of fused silica, will survive without problem at any low or very low temperature, or vacuum environment.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Geraud de Villele, Francis Bonnemason, Christian Brach, Jean Flamand, John R Gilchrist, Bruno Touzet, Robert Grange, and Bruno Milliard "High-efficiency IR transmission gratings (GRISM) engraved into substrate", Proc. SPIE 5252, Optical Fabrication, Testing, and Metrology, (26 February 2004); https://doi.org/10.1117/12.514278
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Prisms

Manufacturing

Atomic force microscopy

Ions

Infrared radiation

Polarization

Back to Top