Paper
10 June 2004 Multiple ultrashort pulse damage of AR-coated beta-barium borate
Author Affiliations +
Abstract
An investigation of ultra short pulse damage threshold of AR coated beta-barium borate (BBO) used for SHG or as Q-switching material has been carried out. As a laser source, a CPA Ti:Sapphire laser system operating at a wavelength of 775 nm tuned to various pulse durations (150 fs, 1 ps, 3 ps) has been used. The online damage detection system is based on a scatter probe unit. It is capable of counting the number of pulses prior to damage and logging of the damage level, and allows for the interruption of irradiation immediately after damage. For S-on-1 irradiation and pulse numbers of up to 104 per site, LIDTs of 0.3, 0.8 and 1.9 J/cm2 were detected for the given pulse durations. Characteristic damage curves were measured according to the ISO standard 11254 2.0. Coating delamination was observed as the damage morphology.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul Allenspacher, Ralf Baehnisch, and Wolfgang Riede "Multiple ultrashort pulse damage of AR-coated beta-barium borate", Proc. SPIE 5273, Laser-Induced Damage in Optical Materials: 2003, (10 June 2004); https://doi.org/10.1117/12.524383
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picosecond phenomena

Coating

Laser damage threshold

Laser systems engineering

Cameras

Photomicroscopy

Pulsed laser operation

Back to Top