Paper
30 April 2004 Characteristic of Bragg grating imprinted in 2x2 fused-tapered coupler
Aiping Luo, Fabien Bayle, Emmanuel Marin, Jean-Pierre Meunier, Zujie Fang
Author Affiliations +
Proceedings Volume 5279, Optical Fibers and Passive Components; (2004) https://doi.org/10.1117/12.521759
Event: Asia-Pacific Optical and Wireless Communications, 2003, Wuhan, China
Abstract
The influence of the position and the length of the Bragg grating written into conventional 2×2 fused couplers on its spectral response is numerically investigated and analyzed. It is possible to realize optical add and drop multiplexers with conventional fused couplers as well as with photosensitive couplers, and there is an optimized position and appropriate length of grating to obtain high reflectivity from drop port. In order to improve the characteristics of the component, a nonlinear chirped grating is proposed to be written into the coupler. According to the parameters in simulation, component with larger than 10dB reflectivity and bandwidth >1nm is obtained by inscribing a uniform Bragg grating in fusion region of the 3dB coupler experimentally.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aiping Luo, Fabien Bayle, Emmanuel Marin, Jean-Pierre Meunier, and Zujie Fang "Characteristic of Bragg grating imprinted in 2x2 fused-tapered coupler", Proc. SPIE 5279, Optical Fibers and Passive Components, (30 April 2004); https://doi.org/10.1117/12.521759
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Reflectivity

Fiber couplers

Modulation

Multiplexers

Step index fibers

Ultraviolet radiation

RELATED CONTENT


Back to Top