Paper
12 July 2004 Spectral optoacoustic imaging using a wavelength-multiplexing technique
Guenther Paltauf, Miriam Steininger
Author Affiliations +
Abstract
Spectral optoacoustic imaging uses two or more optical wavelengths for the excitation of ultrasonic waves in order to obtain spectrally resolved images of tissue. We developed a wavelength-multiplexing method that enables the simultaneous generation and detection of optoacoustic waves with two optical wavelengths emitted from a pump laser - optical parametric oscillator system. Two-dimensional images were taken with a linearly scanning optoacoustic transducer from phantoms and from tissue in vivo. The time required for signal acquisition depended solely on the pulse repetition rate of the laser. At presence, with a 10 Hz system, this time was between 10 and 20 seconds. Pairs of images at two wavelengths show an exact overlap of the imaged structures. Wavelength-dependent variations of optical absorption coefficients are visualized by calculating ratio and difference images. The presented experimental results demonstrate the feasibility of the method to generate maps of blood oxygenation.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guenther Paltauf and Miriam Steininger "Spectral optoacoustic imaging using a wavelength-multiplexing technique", Proc. SPIE 5320, Photons Plus Ultrasound: Imaging and Sensing, (12 July 2004); https://doi.org/10.1117/12.536698
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Sensors

Tissue optics

Signal detection

Acoustics

Blood

Signal attenuation

RELATED CONTENT


Back to Top