Paper
6 May 2004 Analysis of the noise components of the various imaging plates
Hiroshi Matsumoto, Yuichi Hosoi, Yasuhiko Goto, Satoshi Arakawa
Author Affiliations +
Abstract
We analyzed the relationship between the noise components and detectability of the various Imaging Plates to find the essential factors for improving Imaging Plate. CR system noise is classified into quantum noise and fixed noise. The dominant component of fixed noise is the structural noise of IP. The contribution of the structural noise was relatively high at higher exposure and at higher spatial frequency. For example the ratio of structural noise of early type of IP is 55% in case of 2 mR (5.16 × 10-7 C/kg) exposure at 2 cycles/mm spatial frequency. On the other hand, the ratio of the latest type is about 20%. This improvement leads to 2.3 times NEQ combined with improvement of quantum noise. Threshold depth of the 0.5 mm diameter hole of CD diagram was improved from 1.4 mm to 0.8 mm according to the improvement of NEQ from 50,000 to 100,000 /mm2 at the related spatial frequencies. Amount of improvement of threshold contrast was influenced especially by the NEQ at relatively high spatial frequencies. So improvement of the structural noise, which is dominant at higher frequency, is important as well as quantum noise.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Matsumoto, Yuichi Hosoi, Yasuhiko Goto, and Satoshi Arakawa "Analysis of the noise components of the various imaging plates", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.533565
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spatial frequencies

X-rays

Modulation transfer functions

Image quality

Chromium

Denoising

Europium

Back to Top