Evaluation of new in-chip and arrayed line overlay target designs

Ravikiran Attota; Richard M. Silver; Michael Bishop; Egon Marx; Jau-Shi Jay Jun; Michael Stocker; Mark P. Davidson; Robert D. Larrabee

doi:10.1117/12.539164

24 May 2004 Evaluation of new in-chip and arrayed line overlay target designs

Ravikiran Attota, Richard M. Silver, Michael Bishop, Egon Marx, Jau-Shi Jay Jun, Michael Stocker, Mark P. Davidson, Robert D. Larrabee

Author Affiliations +

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.539164
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

Two types of overlay targets have been designed and evaluated for the study of optical overlay metrology. They are in-chip and arrayed overlay targets. In-chip targets are three-bar two-level targets designed to be placed in or near the active device area of a chip. They occupy a small area in the range of 5 μm² to 15 μm² and have line widths, which are nominally device dimensions. The close proximity of the line features result in strong proximity effects. We have used two well-established theoretical models to simulate and study the effects of proximity on overlay measurements. In this paper, we also present a comparison of optical overlay results with scanning electron microscope measurements. Arrayed targets have also been designed to improve and enhance the optical signal for small critical dimension features. We have also compared theoretical simulations of arrayed targets to experimental results. In these comparisons we observe a significant variation in the location of the best focus image with respect to the features. The through-focus focus-metric we have implemented in the current work to determine the best focus image shows interesting properties with potential applications for line width metrology and process control. Based on simulation results, the focus-metric is sensitive to changes in line width dimensions on the nanometer scale.

Citation Download Citation

Ravikiran Attota, Richard M. Silver, Michael Bishop, Egon Marx, Jau-Shi Jay Jun, Michael Stocker, Mark P. Davidson, and Robert D. Larrabee "Evaluation of new in-chip and arrayed line overlay target designs", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.539164

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available