Fundamental measurement procedures for establishing optical tolerances for ground-based telescopes

T. Stewart McKechnie

doi:10.1117/12.551028

16 September 2004 Fundamental measurement procedures for establishing optical tolerances for ground-based telescopes

T. Stewart McKechnie

Proceedings Volume 5497, Modeling and Systems Engineering for Astronomy; (2004) https://doi.org/10.1117/12.551028
Event: SPIE Astronomical Telescopes + Instrumentation, 2004, Glasgow, United Kingdom

Abstract

Fundamental measurement procedures are described that enable full end-to-end characterization of the entire imaging path between astronomical objects and their telescope images. The procedures are based on measurements of certain key properties of point-object (unresolved star) images, properties that carry the essential information about the integrated effects of all mechanisms in the imaging path that contribute to the OPD fluctuations. These mechanisms can include, but are not limited to, atmospheric turbulence, dome turbulence, telescope aberrations, the effect of wind-induced oscillations on large multiple-segment primary mirrors, and the (corrective) effects of Adaptive Optics (AO). The measurement procedures are fully general and take into account amplitude scintillation as well as phase variation in the wavefronts. The effects of atmospheric turbulence are fully encrypted in the statistical properties of the OPD fluctuations in the telescope pupil. In turn, these OPD properties are fully encrypted in the measured point-object image properties. Consequently, there is no need to make a priori assumptions about the form of the turbulence structure function, Kolmogorov or otherwise; the measurement procedures naturally provide the appropriate structure function. Whereas telescope aberrations usually contribute fixed amounts to the total OPD fluctuation, other mechanisms, such as atmospheric turbulence, contribute time-varying amounts. The measurement procedures allow the fixed OPD contributions to be separated from the time varying contributions. If AO is used, it is appropriate to have the AO system running during the measurement procedures, which otherwise remain unchanged. The procedures described are fundamental to establishing appropriate end-to-end wavefront error budgets for ground-based telescopes and to establishing telescope resolution expectations as a function of wavelength.

Citation Download Citation

T. Stewart McKechnie "Fundamental measurement procedures for establishing optical tolerances for ground-based telescopes", Proc. SPIE 5497, Modeling and Systems Engineering for Astronomy, (16 September 2004); https://doi.org/10.1117/12.551028

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available