Translator Disclaimer
Paper
2 June 2004 Shaped beam technology for nano-imprint mask lithography
Author Affiliations +
Proceedings Volume 5504, 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents; (2004) https://doi.org/10.1117/12.568035
Event: 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents, 2004, Dresden, Germany
Abstract
the Leica SB350MW 50keV shaped-beam e-beam lithography tool was used to write large-area 1X templates applicable in Step and Flash Imprint Lithography (S-FIL). This paper describes how information from the pattern analysis can be used to define the ZEP7000 resist exposure optimization technique for the SB350 MW tool together with the Motorola template pattern transfer process to obtain final template images in the transparent template. As a result of the complete process, well-resolved trenches measuring 33 nm and contacts as small as 44nm were obtained. Further improvements in the resist patterning will be possible by an adaptation of our standard proximity corrector (currently used in the 90 nm node maskmaking) with a high resolution upgrade.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Hudek, Dirk Beyer, Timothy R. Groves, Olaf K. Fortagne, William J. Dauksher, David P. Mancini, Kevin J. Nordquist, and Douglas J. Resnick "Shaped beam technology for nano-imprint mask lithography", Proc. SPIE 5504, 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents, (2 June 2004); https://doi.org/10.1117/12.568035
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
Back to Top