Measurement of lens focal length using multicurvature analysis of Shack-Hartmann wavefront data

Daniel R. Neal; R. James Copland; David A. Neal; Daniel M. Topa; Phillip Riera

doi:10.1117/12.561772

14 October 2004 Measurement of lens focal length using multicurvature analysis of Shack-Hartmann wavefront data

Daniel R. Neal, R. James Copland, David A. Neal, Daniel M. Topa, Phillip Riera

Proceedings Volume 5523, Current Developments in Lens Design and Optical Engineering V; (2004) https://doi.org/10.1117/12.561772
Event: Optical Science and Technology, the SPIE 49th Annual Meeting, 2004, Denver, Colorado, United States

Abstract

The lens is one of the most commonly used optical elements. Yet it is sometimes difficult to make accurate effective focal length and pupil position measurements, especially for long focal length lenses. Many measurement methods rely on a mechanical measurement to determine the back focal length, or may require careful operator discrimination in determining the best focus position. Aberrations may confuse an automatic focal length measurement system. However, an accurate determination of the optical properties of a lens is often critical for building an accurate system model. We have developed a method for measurement of the focal length, pupil plane and collimation positions of positive lenses using a Shack-Hartmann wavefront sensor. The SHWFS uses a micro-optic lens array to separate the incoming wavefront into a pattern of focal spots. The position of these focal spots is related to the local wavefront slope. Wavefront reconstruction allows the complete incident wavefront to be retrieved. A Zernike decomposition reconstructor is used to separate the effects of lens focal power from other aberrations. The lens under test is illuminated by a point source on a computer-controlled stage. The transmitted wavefront was recorded by the SHWFS while the source was translated over a few mm range. By analyzing the Zernike coefficient associated with defocus, we were able to extract the focal length, pupil plane and collimation positions using a least squares fitting procedure. This procedure was tested for a variety of lenses of varying focal lengths, from 10 to 1000 mm focal length, and showed excellent repeatability and accuracy. These measurements were compared to knife-edge, manufacturer’s specification, and ray-tracing analysis for verification testing.

Citation Download Citation

Daniel R. Neal, R. James Copland, David A. Neal, Daniel M. Topa, and Phillip Riera "Measurement of lens focal length using multicurvature analysis of Shack-Hartmann wavefront data", Proc. SPIE 5523, Current Developments in Lens Design and Optical Engineering V, (14 October 2004); https://doi.org/10.1117/12.561772

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available