Structurally integrated organic light-emitting device-based sensors for oxygen, glucose, hydrazine, and anthrax

Ruth Shinar; Bhaskar Choudhury; Zhaoqun Zhou; Hai-Sheng Wu; Louisa B. Tabatabai; Joseph Shinar

doi:10.1117/12.569078

7 December 2004 Structurally integrated organic light-emitting device-based sensors for oxygen, glucose, hydrazine, and anthrax

Ruth Shinar, Bhaskar Choudhury, Zhaoqun Zhou, Hai-Sheng Wu, Louisa B. Tabatabai, Joseph Shinar

Author Affiliations +

Proceedings Volume 5588, Smart Medical and Biomedical Sensor Technology II; (2004) https://doi.org/10.1117/12.569078
Event: Optics East, 2004, Philadelphia, Pennsylvania, United States

Abstract

Application of the new platform of structurally integrated luminescent chemical and biological sensors, in which the photoluminescence (PL) excitation source is an organic light-emitting device (OLED), is demonstrated for the detection of oxygen, glucose, hydrazine, and anthrax lethal factor (LF). The oxygen sensors are based on the collisional quenching of the PL of tris(4,7-diphenyl-1,10-phenanthroline) Ru (II) (Ru(dpp)) and Pt octaethyl porphyrin (PtOEP) by O₂. The glucose sensors are based on the O₂ sensors, to which glucose oxidase, which catalyzes the reaction between glucose and O₂, is added. The oxygen and glucose sensors are operable in either the PL intensity I mode or the PL lifetime t mode, where the value of I or t yields the oxygen level. In the t mode, the need for sensor calibration, which remains a challenge in real-world sensing applications, is eliminated. The performance of sensors based on [blue 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl (DPVBi) OLEDs]/[Ru(dpp)] are compared to those of [green tris(8-hydroxy quinoline) Al (Alq₃)]/[PtOEP]. The latter are strongly preferred over the former, due to the relatively long t of PtOEP (~130 ms in the absence of O₂), and the higher efficiency and brightness of the green Alq₃ OLEDs. Demonstration of the hydrazine sensor is based on the reaction between nonluminescent anthracene-2,3-dicarboxaldehyde and hydrazine or hydrazine sulfate, which generates a luminescent product. The anthrax LF sensor is based on the cleavage of certain peptides by the anthrax-secreted LF enzyme. As the LF cleaves a fluorescence resonance energy transfer (FRET) donor-acceptor pair-labeled peptide, and the two cleaved segments are separated, the PL of the donor, previously absorbed by the acceptor, becomes detectable by the photodetector.

Citation Download Citation

Ruth Shinar, Bhaskar Choudhury, Zhaoqun Zhou, Hai-Sheng Wu, Louisa B. Tabatabai, and Joseph Shinar "Structurally integrated organic light-emitting device-based sensors for oxygen, glucose, hydrazine, and anthrax", Proc. SPIE 5588, Smart Medical and Biomedical Sensor Technology II, (7 December 2004); https://doi.org/10.1117/12.569078

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available