Paper
10 January 2005 Reflection L-band erbium-doped fiber-amplifier-based fiber loop mirror
Author Affiliations +
Proceedings Volume 5623, Passive Components and Fiber-based Devices; (2005) https://doi.org/10.1117/12.568188
Event: Asia-Pacific Optical Communications, 2004, Beijing, China
Abstract
We constructed a reflection L-band erbium-doped fiber amplifier based on fiber loop mirror, which reflects the backward ASE to the EDF as a secondary pumping source. A gain of 30 dB increased 6 dB compared to the forward end-pumped EDFA has been achieved in the wavelength region from 1570 to 1603 nm. In order to improve the gain and NF further, we constructed a novel configuration for reflection L-band erbium-doped fiber amplifier via inserting a 980 nm LD in the input part. Adjusting the ratio of power of the two LDs, the gain and NF are greatly improved in different degree in the region from 1565 to 1615 nm. Compared to the configuration pumped by only 1480 nm LD with given power, the gain enhanced 1.5-9.9 dB and the NF decreases 1.3-9.4 dB.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongyun Meng, Songhao Liu, and Xiaoyi Dong "Reflection L-band erbium-doped fiber-amplifier-based fiber loop mirror", Proc. SPIE 5623, Passive Components and Fiber-based Devices, (10 January 2005); https://doi.org/10.1117/12.568188
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical amplifiers

Fiber amplifiers

L band

Mirrors

Signal attenuation

Wavelength division multiplexing

Feedback loops

Back to Top