Paper
14 February 2005 Bragg grating sensor for torsion and temperature measurements in rotating machinery
Pieter L. Swart, Anatoli A. Chtcherbakov, A. J. van Wyk
Author Affiliations +
Abstract
Torque sensing on rotating shafts is important for monitoring electrical and internal combustion machines, especially for real-time computer control. Optical fiber sensors are ideally suited to this application because of many desirable properties such as immunity to electromagnetic interference, their multiplexing capability and small size. This paper discusses a dual fiber Bragg grating sensor for the independent measurement of temperature and torsion in a rotating shaft. It shows theoretically that whereas torsion affects the differential wavelength of the gratings in the proposed configuration, temperature changes in principle only the common-mode wavelength. These characteristics of the system allow one to measure both torsion and temperature with the same sensing system. For the particular system investigated experimentally, the differential wavelength change was 19.4 pm/Nm, and the corresponding temperature sensitivity was -0.67 pm/°C. In contrast to these values, the temperature sensitivity of the common-mode wavelength was 25.4 pm/°C, and its torque cross-sensitivity was -0.19 pm/Nm.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pieter L. Swart, Anatoli A. Chtcherbakov, and A. J. van Wyk "Bragg grating sensor for torsion and temperature measurements in rotating machinery", Proc. SPIE 5634, Advanced Sensor Systems and Applications II, (14 February 2005); https://doi.org/10.1117/12.577002
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Fiber Bragg gratings

Sensors

Reflectivity

Fiber optics sensors

Combustion

Electromagnetic interference

Back to Top