Fiber Bragg grating sensors for structural and railway applications

H. Y. Tam; S. Y. Liu; B. O. Guan; W. H. Chung; T. H.T. Chan; L. K. Cheng

doi:10.1117/12.580803

14 February 2005 Fiber Bragg grating sensors for structural and railway applications

H. Y. Tam, S. Y. Liu, B. O. Guan, W. H. Chung, T. H.T. Chan, L. K. Cheng

Proceedings Volume 5634, Advanced Sensor Systems and Applications II; (2005) https://doi.org/10.1117/12.580803
Event: Photonics Asia, 2004, Beijing, China

Abstract

Historically, due to the high cost of optical devices, fiber-optics sensor systems were only employed in niche areas where conventional electrical sensors are not suitable. This scenario changed dramatically in the last few years following the explosion of the Internet which caused the rapid expansion of the optical fiber telecommunication industry and substantially driven down the cost of optical components. In recent years, fiber-optic sensors and particularly fiber Bragg grating (FBG) sensors have attracted a lot of interests and are being used in numerous applications. We have conducted several field trials of FBG sensors for railway applications and structural monitoring. About 30 FBG sensors were installed on the rail tracks of Kowloon-Canton Railway Corp. for train identification and speed measurements and the results obtained show that FBG sensors exhibit very good performance and could play a major role in the realization of "Smart Railway". FBG sensors were also installed on Hong Kong's landmark TsingMa Bridge, which is the world longest suspension bridge (2.2 km) that carries both trains and regular road traffic. The trials were carried out with a high-speed (up to 20 kHz) interrogation system based on CCD and also with a interrogation unit that based on scanning optical filter (up to 70 Hz). Forty FBGs sensors were divided into 3 arrays and installed on different parts of the bridge (suspension cable, rocker bearing and truss girders). The objectives of the field trial on the TsingMa Bridge are to monitor the strain of different parts of the bridge under railway load and highway load, and to compare the FBG sensors' performance with conventional resistive strain gauges already installed on the bridge. The measured results show that excellent agreement was obtained between the 2 types of sensors.

Citation Download Citation

H. Y. Tam, S. Y. Liu, B. O. Guan, W. H. Chung, T. H.T. Chan, and L. K. Cheng "Fiber Bragg grating sensors for structural and railway applications", Proc. SPIE 5634, Advanced Sensor Systems and Applications II, (14 February 2005); https://doi.org/10.1117/12.580803

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available