Paper
14 February 2005 Measurement of opaque film's surface profile by broadband-light interference methods
Author Affiliations +
Abstract
A new method based on the principle of broadband-light interference, which combines reflected spectrum analysis and optical fiber techniques, is proposed to measure surface profile of opaque film. The testing system mainly consists of a Michelson interferometer. Incident light is split into a reference beam and an input beam to the sample. When two lights reflected from the surface of film and mirror may interfere within the range of broadband light coherent length, the output of interference patterns is measured by a spectrograph. The optical path difference of the sample point and the reference mirror is tested by analyzing the interference pattern. When the reference mirror is fixed, the relative thickness value of different measuring points on the film's surface is achieved by scanning the film's surface. Its testing range is from 0.2 micron to less than 20 micron. According to the relative thickness data, the film’s surface profile is obtained. The result shows that the testing error of this method is within 2 nm. This method has the advantages over the other measuring method, such as nondestructive, higher accuracy and simple structure.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongkai Zhu, Yan Sun, Hong Zhao, and Wang Zhao "Measurement of opaque film's surface profile by broadband-light interference methods", Proc. SPIE 5634, Advanced Sensor Systems and Applications II, (14 February 2005); https://doi.org/10.1117/12.574327
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Opacity

Beam splitters

Mirrors

Michelson interferometers

Surface roughness

Ocean optics

Optical fibers

Back to Top