Fabrication of microstructures with different aspect ratios in a single layer

Yao Fu; Erol C. Harvey; Muralidhar K. Ghantasala

doi:10.1117/12.581894

23 February 2005 Fabrication of microstructures with different aspect ratios in a single layer

Yao Fu, Erol C. Harvey, Muralidhar K. Ghantasala

Proceedings Volume 5650, Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II; (2005) https://doi.org/10.1117/12.581894
Event: Smart Materials, Nano-, and Micro-Smart Systems, 2004, Sydney, Australia

Abstract

Magnetic actuation has been very successful in both macro and micro scales and magnetic microactuators with different microstructures have also been extensively studied. Almost all of these microactuators are based on the electromagnetic effect and the force is generated by the electromagnetic coil, between the soft magnetic core and the (magnetic) cantilever. To integrate all of these magnetic components on the same chip, microstructures with different aspect ratios were fabricated in a single layer by using a photolithography process using the negative photoresist SU-8 2000. A copper microcoil, a permalloy core and a nickel metal post for suspending a cantilever beam were electroplated on the same seed layer with aspect ratios varying from 1:1, 5:1 to 10:1, and the dimensions of the features ranging from 25 μm to 500 μm. The three different features were fabricated separately in three layers. Different viscosity of SU-8 2000 was used in three layers. 50 μm, 80 μm and 200 μm thick SU-8 are used to pattern the molds for electroplating three different features. 25 μm thick copper microcoils with an aspect ratio 1:1 was first electroplated on the Ti/Cu/Ti seed layer. This is followed by electroplating of 50 μm thick permalloy layer with an aspect ratio 10:1 on the same seed layer. A 100 μm thick copper post with an aspect ratio 5:1 was electroplated on to the same seed layer in the next step. SU-8 resist molds were removed between each of these layers. Finally, the residual SU-8 was cleaned by CF₄ plasma etching. The coils have 19 turns with a footprint area of 10 mm². The microcoils were tested to ascertain their maximum current densities before burnout. Similarly, the magnetic properties of the Permalloy core were also tested. The profiles of different layers and the coil and permalloy core test results were discussed in detail in this paper.

Citation Download Citation

Yao Fu, Erol C. Harvey, and Muralidhar K. Ghantasala "Fabrication of microstructures with different aspect ratios in a single layer", Proc. SPIE 5650, Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II, (23 February 2005); https://doi.org/10.1117/12.581894

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available