You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
4 April 2005Micro-mirror formed using excimer laser processing in a polymer waveguide
A micro-mirror formed using excimer laser processing for a fluorinated polyimide waveguide film was demonstrated. The tilted excimer laser irradiation to the waveguide core formed a micro-mirror with an angle of 45 +/- 1-degree. The micro-mirror had convex profile and exhibited a lens effect as a concave mirror. The micro-mirror, as formed, exhibited a low reflection loss of approximately 0.6dB at a wavelength of 850nm. This technique applied to flexible optical and electrical circuit board.
Tsuyoshi Shioda
"Micro-mirror formed using excimer laser processing in a polymer waveguide", Proc. SPIE 5724, Organic Photonic Materials and Devices VII, (4 April 2005); https://doi.org/10.1117/12.592060
The alert did not successfully save. Please try again later.
Tsuyoshi Shioda, "Micro-mirror formed using excimer laser processing in a polymer waveguide," Proc. SPIE 5724, Organic Photonic Materials and Devices VII, (4 April 2005); https://doi.org/10.1117/12.592060