Paper
21 April 2005 Fabrication of holographic input coupler for optical storage device using photopolymer
Author Affiliations +
Abstract
Holographic transmission gratings with 0o;-Bragg angle are widely used to couple light into and out of waveguides due to their high diffraction efficiencies and planar packaging. In this paper, a holographic grating coupler based on the photopolymer has been designed and experimentally demonstrated. To achieve the high diffraction efficiencies, we investigate the optical properties of the coupler according to the exposure energy at the 405 nm wavelength. For the asymmetrical geometry with 72othe correction of the Bragg angles shift of about 0.95o; and 3.45o;, which are induced by the 7.86% shrinkage factor, is successfully demonstrated. The performance and the optical characteristics of the coupler using volume holographic grating are discussed in detail.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang Won Shin, Nam Kim, Jung Hoi Kim, Viet Tien Vu, Dong Woo Suh, Mun Cheol Paek, and Yong Woo Park "Fabrication of holographic input coupler for optical storage device using photopolymer", Proc. SPIE 5742, Practical Holography XIX: Materials and Applications, (21 April 2005); https://doi.org/10.1117/12.590341
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Holography

Diffraction gratings

Optical properties

Holograms

Refractive index

Modulation

Back to Top