Separating the uncorrelated noise from the correlated detector noise of flat panel systems in order to quantify flat panel noise easily

Christoph Hoeschen; Oleg Tischenko; Bernhard Renger; Kerstin Jungnickel

doi:10.1117/12.595758

20 April 2005 Separating the uncorrelated noise from the correlated detector noise of flat panel systems in order to quantify flat panel noise easily

Christoph Hoeschen, Oleg Tischenko, Bernhard Renger, Kerstin Jungnickel

Author Affiliations +

Proceedings Volume 5745, Medical Imaging 2005: Physics of Medical Imaging; (2005) https://doi.org/10.1117/12.595758
Event: Medical Imaging, 2005, San Diego, California, United States

Abstract

One big advantage in terms of image quality of modern flat panel detector systems compared to CR systems beside the better DQE of these systems is the possibility to correct for inhomogeneities of the X-ray beam and the detector (flat field correction) as well as for bad pixels. However, the used correction methods are taking a lot of time or do not cover all possible combinations of radiation quality and exposure used for patient imaging. A method is presented to achieve these correction images very easily by using a proposed method for comparing two images. This method, which has so far been used for certain noise measurements and in some cases noise reduction, can also be used for separating correlated from uncorrelated noise by correlating in frequency sub-bands the information of two images. In this study it is proven, that the uncorrelated noise image of two expositions is very similar to the correction image gained just before the two exposures. That allows to calibrate a detector quite more often and for much more beam qualities/exposures than before to achieve a better correction and another possibility of constancy testing for flat panel detectors, because the proposed method is so sensitive that it will detect single pixel changes within the detector.

Citation Download Citation

Christoph Hoeschen, Oleg Tischenko, Bernhard Renger, and Kerstin Jungnickel "Separating the uncorrelated noise from the correlated detector noise of flat panel systems in order to quantify flat panel noise easily", Proc. SPIE 5745, Medical Imaging 2005: Physics of Medical Imaging, (20 April 2005); https://doi.org/10.1117/12.595758

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available