Comparison of the damping and stiffness properties of 8wt% yttria stabilized zirconia ceramic coating deposited by the APS and EB-PVD techniques

N. Tassini; K. Lambrinou; I. Mircea; S. Patsias; O. Van der Biest; R. Stanway

doi:10.1117/12.600711

16 May 2005 Comparison of the damping and stiffness properties of 8wt% yttria stabilized zirconia ceramic coating deposited by the APS and EB-PVD techniques

N. Tassini, K. Lambrinou, I. Mircea, S. Patsias, O. Van der Biest, R. Stanway

Author Affiliations +

Proceedings Volume 5760, Smart Structures and Materials 2005: Damping and Isolation; (2005) https://doi.org/10.1117/12.600711
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

Recent research into the use of thermal barrier coatings has shown that they can provide sufficient additional damping, reducing vibration levels and significantly extending the life of the coated component. Various deposition techniques may be employed to apply ceramic coatings with Air Plasma Spraying (APS) and Electron Beam - Physical Vapour Deposition (EB-PVD) being the most widely used. However, one has to take into account that even when the starting ceramic material is the same, the microstructures of the resultant coatings depend strongly on the deposition technique. The objective of this paper is to study of the differences in the damping behaviour and stiffness of an yttria-stabilised zirconia (YSZ with 8%wt yttria) coating deposited by APS and by EB-PVD. Both damping and stiffness of these two YSZ coatings were estimated from tests performed at room and high temperatures. Moreover, this paper presents the microstructural characterisation of these two YSZ coatings using scanning electron microscopy, and attempts a correlation of the differences in their properties to their microstructure.

Citation Download Citation

N. Tassini, K. Lambrinou, I. Mircea, S. Patsias, O. Van der Biest, and R. Stanway "Comparison of the damping and stiffness properties of 8wt% yttria stabilized zirconia ceramic coating deposited by the APS and EB-PVD techniques", Proc. SPIE 5760, Smart Structures and Materials 2005: Damping and Isolation, (16 May 2005); https://doi.org/10.1117/12.600711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available