Translator Disclaimer
17 May 2005 Feasibility study on rotorcraft blade morphing in hovering
Author Affiliations +
The study of acoustic noise generated by helicopter main rotors is the object of many theoretical and experimental investigations because of the complexity of the related physical phenomena and its strong influence on the vehicle performance. One of the main targets of the FriendCopter European Project is to define technical solutions aimed at improving the helicopter acoustic performance. In this work some related activities are described. The extremely complex operating environment of a helicopter rotor contributes to noise generation through several distinct mechanisms: among them, blade vortex interaction noise (BVI) results extremely annoying when it occurs. One method for BVI alleviation is to increase the separation of the tip vortex from the rotor plane using an adaptive blade tip (anhedral configuration) to diffuse the tip vortex or to displace it. In this work, as a first step of the investigation, a feasibility study on blade tip morphing will be addressed, neglecting any aeroacoustic estimation; a specific flight condition will be considered to evaluate the efficiency of a particular smart system based on the coupled action of shape memory alloys (SMAs) and magneto-rheological fluids (MRFs). Such a kind of actuation system has to realise an on-off mechanism through which the tip blade displacement is maximised: the properties of the MR fluid will be exploited to selectively reduce the bending stiffness spanwise so that the SMA actuation is increased. A theoretical model and numerical investigations will be shown to evaluate the reliability and the effectiveness of the integrated system.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claudio Testa, Stefania Leone, Salvatore Ameduri, and Antonio Concilio "Feasibility study on rotorcraft blade morphing in hovering", Proc. SPIE 5764, Smart Structures and Materials 2005: Smart Structures and Integrated Systems, (17 May 2005);

Back to Top