Investigation of pellicle influence on reticle flatness

Christopher Lee; Kenneth Racette; Monica Barrett

doi:10.1117/12.617120

28 June 2005 Investigation of pellicle influence on reticle flatness

Christopher Lee, Kenneth Racette, Monica Barrett

Author Affiliations +

Proceedings Volume 5853, Photomask and Next-Generation Lithography Mask Technology XII; (2005) https://doi.org/10.1117/12.617120
Event: Photomask and Next Generation Lithography Mask Technology XII, 2005, Yokohama, Japan

Abstract

In lithography systems, the need for increased resolution requires larger numerical apertures and shorter illumination wavelengths. Both of these requirements cause a reduction in the system’s depth of focus resulting in the need for flatter photomasks with specifications under 0.5 micron. Currently the mask blank substrates are measured after polishing, and all subsequent process steps are assumed to have little or no impact on the final mask flatness. With today’s ever tightening flatness requirements, this assumption can no longer be taken for granted. This paper investigates the distortions seen at the reticle surface induced by the mounting of a standard optical pellicle frame to the photomask and relates these distortions to the pellicle frame flatness. The experiment involves using a set of mask blanks that are better than 0.5 micron flatness with similar form errors before attaching the pellicle. Two groups of pellicles are used to create two distinct frame flatness populations: one set assumed to be within specification as purchased; and a second set of pellicles that are intentionally distorted. Mask flatness is compared before and after mounting the pellicles, and all frames are measured for flatness. Correlation between the frame flatness and form to the measured distortion on the reticle surface are made and discussed, and a practical guideline for selecting an appropriate blank flatness and pellicle flatness to achieve the desired reticle flatness is suggested.

Citation Download Citation

Christopher Lee, Kenneth Racette, and Monica Barrett "Investigation of pellicle influence on reticle flatness", Proc. SPIE 5853, Photomask and Next-Generation Lithography Mask Technology XII, (28 June 2005); https://doi.org/10.1117/12.617120

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE