Paper
26 August 2005 Overview of the optical design and performance of the high resolution science imaging experiment (HiRISE)
Author Affiliations +
Abstract
The High Resolution Imaging Science Experiment (HiRISE) camera will be launched in August 2005 onboard NASA's Mars Reconnaissance Orbiter (MRO) spacecraft. HiRISE supports the MRO Mission objectives through targeted imaging of nadir and off-nadir sites with high resolution and high signal to noise ratio [a]. The camera employs a 50 cm, f/24 all-reflective optical system and a time delay and integration (TDI) detector assembly to map the surface of Mars from an orbital altitude of ~ 300 km. The ground resolution of HiRISE will be < 1 meter with a broadband red channel that can image a 6 x 12 km region of Mars into a 20K x 40K pixel image. HiRISE will image the surface of Mars at three different color bands from 0.4 to 1.0 micrometers. In this paper the HiRISE mission and its camera optical design will be presented. Alignment and assembly techniques and test results will show that the HiRISE telescope's on-orbit wave front requirement of < 0.071 wave RMS (@633nm) will be met . The HiRISE cross track field is 1.14 degrees with IFOV 1.0 μ-radians.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dennis Gallagher, Jim Bergstrom, Joe Day, Bryan Martin, Timothy Reed, Peter Spuhler, Scott Streetman, and Mark Tommeraasen "Overview of the optical design and performance of the high resolution science imaging experiment (HiRISE)", Proc. SPIE 5874, Current Developments in Lens Design and Optical Engineering VI, 58740K (26 August 2005); https://doi.org/10.1117/12.618539
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Mars

Cameras

Image resolution

Optical design

Sensors

Optical alignment

Back to Top