Experimental set-up for testing alignment and measurement stability of a metrology system in silicon carbide for GAIA

Marielle van Veggel; Arno Wielders; Hedser van Brug; Nick Rosielle; Henk Nijmeijer

doi:10.1117/12.614031

8 September 2005 Experimental set-up for testing alignment and measurement stability of a metrology system in silicon carbide for GAIA

Marielle van Veggel, Arno Wielders, Hedser van Brug, Nick Rosielle, Henk Nijmeijer

Author Affiliations +

Proceedings Volume 5877, Optomechanics 2005; 587701 (2005) https://doi.org/10.1117/12.614031
Event: Optics and Photonics 2005, 2005, San Diego, California, United States

Abstract

The GAIA satellite will make a 3-D map of our Galaxy with measurement accuracy of 10 microarcseconds using two astrometric telescopes. The angle between the lines-of-sight of the two telescopes will be monitored using the Basic Angle Monitoring system with 1 microarcsecond accuracy. This system will be an interferometer consisting of a number of small mirrors and beam splitters in Silicon Carbide. Silicon Carbide has very high specific stiffness and very good thermal properties (low CTE and high conductivity). It also is a very stable material. A possible concept design for this Basic Angle Monitoring system is subject of a PhD study performed at the Technische Universiteit Eindhoven and TNO Science and Industry (The Netherlands). To prove that this concept design meets the alignment and measurement stability requirements, the GAIA extreme stability optical bench is developed. It will consist of a fourfold Michelson interferometer with four separate optical paths, which will measure the stability of the optical bench and the individual optical components. Also thermal cycling experiments and vibrations tests will be performed. 'Absolute' position measurements of the optical components with respect to the optical bench after the vibrations test will be performed using markers. The GAIA extreme stability optical bench will be placed in a vibration damped vacuum tank in order to imitate the highly stable L2 space environment. The goal is to obtain the first results early 2006.

Citation Download Citation

Marielle van Veggel, Arno Wielders, Hedser van Brug, Nick Rosielle, and Henk Nijmeijer "Experimental set-up for testing alignment and measurement stability of a metrology system in silicon carbide for GAIA", Proc. SPIE 5877, Optomechanics 2005, 587701 (8 September 2005); https://doi.org/10.1117/12.614031

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available