Impact of dimming white LEDs: chromaticity shifts due to different dimming methods

Marc Dyble; Nadarajah Narendran; Andrew Bierman; Terence Klein

doi:10.1117/12.625924

14 September 2005 Impact of dimming white LEDs: chromaticity shifts due to different dimming methods

Marc Dyble, Nadarajah Narendran, Andrew Bierman, Terence Klein

Proceedings Volume 5941, Fifth International Conference on Solid State Lighting; 59411H (2005) https://doi.org/10.1117/12.625924
Event: Optics and Photonics 2005, 2005, San Diego, California, United States

Abstract

The goal of this study was to characterize the chromaticity shift that mixed-color and phosphor-converted white LED systems undergo when dimmed. As light-emitting diodes continue to rapidly evolve as a viable light source for lighting applications, their color shift while being dimmed should meet the current requirements of traditional lighting sources. Currently, LED system manufacturers commonly recommend pulse-width-modulation or PWM dimming schemes for operation of LED systems. PWM has the ability to achieve lower intensity levels and more linear control of light intensity compared to continuous current dimming methods. However, little data has been published on the effect dimming has on chromaticity shift of white LED lighting systems. The primary objective of this study was to quantify chromaticity shifts in mixed-color and phosphor-converted white LED systems due to continuous current dimming and pulse-width-modulation dimming schemes. In this study, the light output of the LED system was reduced from 100% to 3% by means of continuous current reduction or PWM methods using a PC white LED system and a mixed-color RGB LED system. Experimental results from this study showed that the PC white LED system exhibited very little chromaticity shift (less than a 4-step MacAdam ellipse) when the light level was changed from 100% to 3% using both dimming schemes. Compared to PC white LEDs, the mixed-color RGB LED system tested in this study showed very large chromaticity shifts in a similar dimming range using both dimming schemes. If a mixed-color RGB system is required, then some active feedback system control must be incorporated to obtain non-perceivable chromaticity shift. In this regard the chromaticity shift caused by the PWM method is easier to correct than the chromaticity shift caused by the continuous current dimming method.

Citation Download Citation

Marc Dyble, Nadarajah Narendran, Andrew Bierman, and Terence Klein "Impact of dimming white LEDs: chromaticity shifts due to different dimming methods", Proc. SPIE 5941, Fifth International Conference on Solid State Lighting, 59411H (14 September 2005); https://doi.org/10.1117/12.625924

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available