Imprinting of low dispersion Bragg gratings in planar devices for 40 Gbps DWDM systems

Lech Wosinski; Marcin Swillo; Matteo Dainese

doi:10.1117/12.622739

29 September 2005 Imprinting of low dispersion Bragg gratings in planar devices for 40 Gbps DWDM systems

Lech Wosinski, Marcin Swillo, Matteo Dainese

Proceedings Volume 5956, Integrated Optics: Theory and Applications; 59560D (2005) https://doi.org/10.1117/12.622739
Event: Congress on Optics and Optoelectronics, 2005, Warsaw, Poland

Abstract

Wavelength selective Bragg grating filters in form of periodic modulation of the refractive index along the waveguide can be laser-imprinted in fibers and planar lightwave circuits (PLC)s utilizing UV photosensitivity of the Ge-doped silica core material. Such gratings have a potential to be extensively used in dense wavelength division multiplexing (DWDM) systems in many optical components including add/drop multiplexers. As a bit rates in DWDM systems continuously increase, these components must have low group delay dispersion as well as steep filter characteristics. In this paper we present fabrication technology and optical characteristics of PLC Bragg gratings and grating assisted Add/Drop multiplexers (ADM)s developed for 40 Gbps DWDM systems. Mach-Zehnder interferometer (MZI)-based ADM structures were fabricated with silica-on-silicon planar technology using Plasma Enhanced Chemical Vapor Deposition and subsequent Reactive Ion Etching. The MZI consisted of two 3dB couplers and two identical Bragg gratings UV-imprinted in both arms of the interferometer. For imprinting of gratings in (PLC)s a computer controlled interferometer with special configuration was designed and fabricated. The interferometer allows writing gratings with periods corresponding to any wavelength within C-band. Gratings as short as 4 mm can give over 30 dB suppression of the reflected channel. If needed, group delay compensation can be introduced by programmable phase perturbation during grating writing. The fabricated ADMs have been tested and shown 0.4 nm flat top transmission bandwidth measured in the Drop port. Clear eye openings at 40 Gbps have been obtained, when tested with SHF 5005A multiplexer and Agilent 86100B digital sampling oscilloscope.

Citation Download Citation

Lech Wosinski, Marcin Swillo, and Matteo Dainese "Imprinting of low dispersion Bragg gratings in planar devices for 40 Gbps DWDM systems", Proc. SPIE 5956, Integrated Optics: Theory and Applications, 59560D (29 September 2005); https://doi.org/10.1117/12.622739

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available