MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique

Joseph A. Menapace; Pete J. Davis; William A. Steele; Lana L. Wong; Tayyab I. Suratwala; Philip E. Miller

doi:10.1117/12.638839

7 February 2006 MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique

Joseph A. Menapace, Pete J. Davis, William A. Steele, Lana L. Wong, Tayyab I. Suratwala, Philip E. Miller

Author Affiliations +

Proceedings Volume 5991, Laser-Induced Damage in Optical Materials: 2005; 599103 (2006) https://doi.org/10.1117/12.638839
Event: Boulder Damage Symposium XXXVII: Annual Symposium on Optical Materials for High Power Lasers, 2005, Boulder, CO, United States

Abstract

Understanding the behavior of fractures and subsurface damage in the processes used during optic fabrication plays a key role in determining the final quality of the optical surface finish. During the early stages of surface preparation, brittle grinding processes induce fractures at or near an optical surface whose range can extend from depths of a few μm to hundreds of μm depending upon the process and tooling being employed. Controlling the occurrence, structure, and propagation of these sites during subsequent grinding and polishing operations is highly desirable if one wishes to obtain high-quality surfaces that are free of such artifacts. Over the past year, our team has made significant strides in developing a diagnostic technique that combines magnetorheological finishing (MRF) and scanning optical microscopy to measure and characterize subsurface damage in optical materials. The technique takes advantage of the unique nature of MRF to polish a prescribed large-area wedge into the optical surface without propagating existing damage or introducing new damage. The polished wedge is then analyzed to quantify subsurface damage as a function of depth from the original surface. Large-area measurement using scanning optical microscopy provides for improved accuracy and reliability over methods such as the COM ball-dimple technique. Examples of the technique's use will be presented that illustrate the behavior of subsurface damage in fused silica that arises during a variety of intermediate optical fabrication process steps.

Citation Download Citation

Joseph A. Menapace, Pete J. Davis, William A. Steele, Lana L. Wong, Tayyab I. Suratwala, and Philip E. Miller "MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 599103 (7 February 2006); https://doi.org/10.1117/12.638839

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE