Need to define a functional LIDT in multiple irradiation cases: examples of silica and KDP at 1064 nm and 355 nm

J.Y. Natoli; J. Capoulade; B. Bertussi; M. Commandre; H. Piombini

doi:10.1117/12.638738

7 February 2006 Need to define a functional LIDT in multiple irradiation cases: examples of silica and KDP at 1064 nm and 355 nm

J.Y. Natoli, J. Capoulade, B. Bertussi, M. Commandre, H. Piombini

Author Affiliations +

Proceedings Volume 5991, Laser-Induced Damage in Optical Materials: 2005; 599109 (2006) https://doi.org/10.1117/12.638738
Event: Boulder Damage Symposium XXXVII: Annual Symposium on Optical Materials for High Power Lasers, 2005, Boulder, CO, United States

Abstract

Multiple laser irradiations induce a critical issue as regards the time of life of optical components. The problem can appear either in high repetition rate lasers or in high power systems even at low frequency. Two opposite behaviors are commonly observed under repetitive irradiations. A "fatigue effect" of materials under subsequent shots is generally observed and results in a decreasing of laser induced damage threshold (LIDT), but in some cases an improvement of LIDT can be noticed. This second effect linked to the pre-irradiation is well known as "conditioning" of the material. In most cases the LIDT in optical components is specified in 1:1, S:1 or R:1 modes, whatever the application of the real system. The aim of this paper is to show that the LIDT is strongly dependant on the parameters of irradiation such as shot number, shot frequency, wavelength and location in the material (surface or bulk). Therefore in order to approach a "true" value of LIDT it is necessary to test the component in the conditions of use, considering all the influential parameters. To illustrate this purpose the influence of previous parameters is studied for KDP and silica. This study shows that we can define a "functional laser damage threshold" in repetitive shot mode and also that the time of life could be deduced for each component. Furthermore these results can be useful to optimize the parameters involved in the conditioning processes.

Citation Download Citation

J.Y. Natoli, J. Capoulade, B. Bertussi, M. Commandre, and H. Piombini "Need to define a functional LIDT in multiple irradiation cases: examples of silica and KDP at 1064 nm and 355 nm", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 599109 (7 February 2006); https://doi.org/10.1117/12.638738

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE