Paper
7 February 2006 Nonlinear absorption of ultrashort pulses in HR dielectric mirrors
Author Affiliations +
Abstract
Nonlinear absorption measurements at 800 nm and 400 nm in single wavelength high reflection (HR) dielectric mirrors were performed, according to the ISO 11551 standard by pulse, gradient and exponential absorption evaluation methods, using pulsed, diode pumped femtosecond laser system with pulse duration ~130 fs. Pulsed laser output at 1kHz repetition rate had 1 W and 0.36 W average power at 800 nm and 400 nm, respectively. The HR mirrors were made of ZrO2 and SiO2 layers. The beam was focused into the mirror, and changing the beam power by step attenuator, it was possible to evaluate nonlinear absorption at different intensities up to intensity close to damage threshold. The nonlinear absorptance for 400 nm pulses at the femtosecond pulse intensity 0.8 TW/cm2 was 0.48 % and ~20 times exceeded the nonlinear absorptance for the 800 nm pulses.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrius Žukauskas, Andrius Melninkaitis, Valdas Sirutkaitis, Kai Starke, and Detlev Ristau "Nonlinear absorption of ultrashort pulses in HR dielectric mirrors", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 599111 (7 February 2006); https://doi.org/10.1117/12.639032
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Mirrors

Dielectric mirrors

Pulsed laser operation

Femtosecond phenomena

Laser damage threshold

Optical components

RELATED CONTENT


Back to Top