Analysis of single mode bent fiber failure under high power conditions

S. L. Logunov; G. S. Glaesemann; M. J. Winningham; D. A. Clark

doi:10.1117/12.638251

7 February 2006 Analysis of single mode bent fiber failure under high power conditions

S. L. Logunov, G. S. Glaesemann, M. J. Winningham, D. A. Clark

Author Affiliations +

Proceedings Volume 5991, Laser-Induced Damage in Optical Materials: 2005; 59912C (2006) https://doi.org/10.1117/12.638251
Event: Boulder Damage Symposium XXXVII: Annual Symposium on Optical Materials for High Power Lasers, 2005, Boulder, CO, United States

Abstract

Optical fiber networks are being developed that require higher optical power levels. Examples include long haul communication with Raman amplification and fiber to the premises. Previous studies indicate that tightly bent optical fiber can mechanically fail when exposed to high optical power levels. In an extreme case where fiber is sharply bent and subjected to a power level of 1 to 2 W in the near-infrared wavelength window, optical fiber can fail in minutes. It also has been shown that time to failure decreases with increasing bend stress and optical power. This study is a further investigation of the physical events leading to failure. Previously we demonstrated that the optical signal that escapes the core of bent fiber passes into the coating, where a small amount is absorbed and converted to heat. As a result the coating can be heated to significant temperatures resulting in degradation over time. This paper focuses on several key aspects of the failure kinetics associated with bent fiber under high power. As a result of bending, optical power leaked from the core is distributed in the glass cladding and polymer coating. We have modeled this power distribution and compared it with measured temperature profiles in the coating. The results show that this redistribution of the power is key to establishing the distribution of temperature in the coating and ensuing degradation. This understanding is used to design glass and coating solutions for inhibiting this potential failure mode.

Citation Download Citation

S. L. Logunov, G. S. Glaesemann, M. J. Winningham, and D. A. Clark "Analysis of single mode bent fiber failure under high power conditions", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 59912C (7 February 2006); https://doi.org/10.1117/12.638251

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE