Development of surface thermal lensing technique in absorption and defect analyses of optical coatings

Hongbo He; Xia Li; Shuhai Fan; Jianda Shao; Yuanan Zhao; Zhengxiu Fan

doi:10.1117/12.634106

7 February 2006 Development of surface thermal lensing technique in absorption and defect analyses of optical coatings

Hongbo He, Xia Li, Shuhai Fan, Jianda Shao, Yuanan Zhao, Zhengxiu Fan

Author Affiliations +

Proceedings Volume 5991, Laser-Induced Damage in Optical Materials: 2005; 59912F (2006) https://doi.org/10.1117/12.634106
Event: Boulder Damage Symposium XXXVII: Annual Symposium on Optical Materials for High Power Lasers, 2005, Boulder, CO, United States

Abstract

Absorption is one of the main factors which cause damage to optical coatings, under the radiation of high power lasers. Surface thermal lensing (STL) technique was developed into a practical high-sensitivity apparatus for the weak absorption analysis of optical coatings. A 20 W continuous-wave 1064 nm Nd:YAG laser and a 30 mW He-Ne laser were employed as pump source and probe source, respectively. Low noise photoelectrical components and an SR830 DSP lock-in amplifier were used for photo-thermal deformation signal detection. In order to improve sensitivity, the configuration of the apparatus was optimized through choosing appropriate parameters, that including pump beam spot size, chopper frequency, detection distance, waist radius and position of probe beam. Coating samples were mounted on an x-y stage which was driven by high precision stepper motors. Different processes of absorption measurements, including single spot, linear scan and 2-dimension area scan, could be performed manually or automatically under the control of PC program. Various optical coatings were prepared by both electron beam evaporation and ion beam sputtering deposition. High sensitivity was obtained and low to 10 ppb absorption could be measured by surface thermal lensing technique. And a spatial resolution of 25 micron was proved according to the area scanning which traced out the profile of photo-thermal defects inside optical coatings. The system was employed in the analyses of optical absorption, absorption uniformity and defect distribution, and revealed the relationship between laser-induced damage and absorption of optical coatings.

Citation Download Citation

Hongbo He, Xia Li, Shuhai Fan, Jianda Shao, Yuanan Zhao, and Zhengxiu Fan "Development of surface thermal lensing technique in absorption and defect analyses of optical coatings", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 59912F (7 February 2006); https://doi.org/10.1117/12.634106

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE