Paper
8 November 2005 Improved modeling of fogging and loading effect correction
Author Affiliations +
Abstract
The correction of fogging effect from an electron beam writer and loading effect from a dry etcher are known as the important factors of non-uniformity of mask CD. To achieve the improvement of CD uniformity, the fogging and loading effect are modeled as a function of pattern density. Taking into account the different behavior of fogging and loading effect on the pattern density, the amount of correction is able to be extracted using the promising modeling and dose modulation technique. In this work, we report the evaluation of correction method with improved model using the linear combination of fogging and loading effect. We compared the various cases and presented the best result of the improvement of CD uniformity.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sanghee Lee, Byunggook Kim, Hakseung Han, Dongseok Nam, Seongyong Moon, Seongwoon Choi, and Woosung Han "Improved modeling of fogging and loading effect correction", Proc. SPIE 5992, 25th Annual BACUS Symposium on Photomask Technology, 59924U (8 November 2005); https://doi.org/10.1117/12.632078
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Critical dimension metrology

Modulation

Dry etching

Photomasks

System on a chip

Backscatter

Back to Top