Paper
2 May 2006 Tracking control of piezoceramic actuators by using preisach model
Xiaofeng Zhou, Shixi Yang, Guoning Qi, Xiaoping Hu
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 604248 (2006) https://doi.org/10.1117/12.664800
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
A major limitation of piezoceramic actuators is their lack of accuracy due to hysteresis nonlinlinearity. The modified preisach model was used to describe the hysteresis of piezoelectric actuator. The output prediction using this model was compared with experimental data. A comparison was made between a regular PID feedback control scheme and a PID feedback control scheme with the modified preisach model in the feed-forward loop. The result shows that using this model can reduce the hysteresis of the displacement to voltage from 18.3% to 3.9%, and the maximal relative error between the output prediction and experimental data is 4.1% over the entire working range 0-19 μm. The dynamic response speed and the tracking control accuracy of the piezoceramic actuator are greatly improved by augmenting a feedback loop with the modified preisach model of hysteresis nonlinearity in the feed forward loop.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaofeng Zhou, Shixi Yang, Guoning Qi, and Xiaoping Hu "Tracking control of piezoceramic actuators by using preisach model", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 604248 (2 May 2006); https://doi.org/10.1117/12.664800
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Data modeling

Model-based design

Feedback control

Control systems design

Control systems

Mathematical modeling

Back to Top