Paper
5 December 2005 Fabry-Perot optical modulator fabricated by aerosol deposition
Author Affiliations +
Proceedings Volume 6050, Optomechatronic Micro/Nano Devices and Components; 605004 (2005) https://doi.org/10.1117/12.648338
Event: Optomechatronic Technologies 2005, 2005, Sapporo, Japan
Abstract
We developed a Fabry-Perot (FP) optical modulator with electro-optic (EO) films fabricated by aerosol deposition (AD). We found the ferroelectric Pb(Zr,Ti)O3 film by AD produced a fairly high EO coefficient (>150 pm/V), approximately 10 times larger than that of LiNbO3. Since thick EO films greater than 5 μm can be deposited on a transparent electrode layer or a metallic mirror layer of the FP optical modulator by AD, the FP optical modulator can achieve low capacitance, resulting in high modulation speed. Transmittance spectra of the FP optical modulator coincided with the optical simulation spectra, which indicated that optical scattering in AD films and at the surface/boundary were very small. We demonstrated an optical intensity modulation with applied electric field to EO film of ferroelectric Pb (Zr, Ti)O3. We obtained a 4-dB modulation with 50 V for the 10-μm-thick modulator with dielectric multilayer mirror on a glass substrate.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masafumi Nakada D.D.S., Keishi Ohashi, Hiroki Tsuda, and Jun Akedo "Fabry-Perot optical modulator fabricated by aerosol deposition", Proc. SPIE 6050, Optomechatronic Micro/Nano Devices and Components, 605004 (5 December 2005); https://doi.org/10.1117/12.648338
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical modulators

Transmittance

Mirrors

Ferroelectric materials

Modulation

Aerosols

Electrodes

RELATED CONTENT


Back to Top