Optical servoing for industrial surface machining

Norbert Koller; Ronald Ofner; Paul O'Leary; Ewald Fauster

doi:10.1117/12.642718

9 February 2006 Optical servoing for industrial surface machining

Norbert Koller, Ronald Ofner, Paul O'Leary, Ewald Fauster

Author Affiliations +

Proceedings Volume 6070, Machine Vision Applications in Industrial Inspection XIV; 607001 (2006) https://doi.org/10.1117/12.642718
Event: Electronic Imaging 2006, 2006, San Jose, California, United States

Abstract

The surface machining of cracks is a key issue to ensure the quality of steel rods and billets. The aim is to grind these defects out of the material. This paper presents a real-time optical servo-system, consisting of three image processing systems and an industrial robot, which fully automate this process. A high resolution color progressive scan camera, placed at a suitable position above the roller conveyor, observes the material and detects color markings indicating the presence of a crack. This camera system controls the roller conveyor transporting the material until a marked crack is detected. Diffuse light sources provide homogeneous lighting to ensure reliable detection of the markings. A demosaicing algorithm, RGB to HSL color modeling and thresholding with statistical morphology are used to identify the marked areas. On detecting a crack the material is automatically positioned within the working area of an industrial robot. A collineation is used to generate metric two-dimensional coordinates corresponding to the bounding rectangle of the detected error. At this point two plane-of-light scanners are used to acquire a cross section of the material to the left and the right of the robot's working area. From this, a three-dimensional model for the rod or billet surface is calculated and the two-dimensional coordinates of the color marking are projected onto this surface to generate a patch. The coordinates of this patch are sent to the 6R industrial robot, which then grinds out the defect. A new concept has been implemented which enables the calibration of the three image processing systems and the industrial robot so as to have one common coordinate system. Operational results have shown the full functionality of the system concept in the harsh environment of a steel production facility.

Citation Download Citation

Norbert Koller, Ronald Ofner, Paul O'Leary, and Ewald Fauster "Optical servoing for industrial surface machining", Proc. SPIE 6070, Machine Vision Applications in Industrial Inspection XIV, 607001 (9 February 2006); https://doi.org/10.1117/12.642718

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE