Bending insensitive highly Yb-doped LMA triple-clad fiber for nearly diffraction-limited laser output

André Croteau; Claude Paré; Huimin Zheng; Pierre Laperle; Yves Taillon

doi:10.1117/12.674317

22 February 2006 Bending insensitive highly Yb-doped LMA triple-clad fiber for nearly diffraction-limited laser output

André Croteau, Claude Paré, Huimin Zheng, Pierre Laperle, Yves Taillon

Proceedings Volume 6101, Laser Beam Control and Applications; 61010G (2006) https://doi.org/10.1117/12.674317
Event: Lasers and Applications in Science and Engineering, 2006, San Jose, California, United States

Abstract

The new highly rare-earth doped triple-clad fiber design comprises a first clad next to the core of the well-known double-clad design. The added clad allows to reduce and to better control the core effective numerical aperture for achieving a highly doped large mode area amplifying fiber with a very low numerical aperture (~0.07). The triple-clad design is optimized to obtain a nearly bending insensitive fiber output while keeping excellent beam quality through proper ytterbium doping. The high ytterbium concentration allows for very high gain from a short (~1 m) fiber length which, in many applications, is required to prevent the onset of nonlinear effects such as stimulated Brillouin scattering. A polarization-maintaining 22-μm core Yb-doped triple-clad fiber was first tested. A laser slope efficiency of up to 86% with a polarization extinction ratio exceeding 24 dB and a M2 output beam quality factor below 1.1, for both laser and amplifier configurations, have been measured. Moreover, beam quality and output power were not significantly affected when coiling the fiber down to a 1.2 cm diameter, thus showing the optical robustness of the triple clad fiber design and offering the opportunity to build very compact high power fiber amplifiers and laser sources.

Citation Download Citation

André Croteau, Claude Paré, Huimin Zheng, Pierre Laperle, and Yves Taillon "Bending insensitive highly Yb-doped LMA triple-clad fiber for nearly diffraction-limited laser output", Proc. SPIE 6101, Laser Beam Control and Applications, 61010G (22 February 2006); https://doi.org/10.1117/12.674317

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available