Translator Disclaimer
23 February 2006 New developments in high power eye-safe LMA fibers
Author Affiliations +
In this paper we present advances made in the development and fabrication of highly efficient, large-mode area fibers for eye-safe wavelengths (1.55 μm, 2.0 μm). LMA Er/Yb co-doped and Tm doped fibers have been successfully fabricated, with 25 μm core and 250 to 300 μm clad diameters, that are suitable for nanosecond pulsed amplification in LIDAR applications as well as high power CW amplification. Manufacturing challenges for these novel fibers are discussed. Measured and modeled data, for both types of fibers, are presented. The development of non-PM and PM-LMA fibers for eye-safe applications is expected to spur rapid progress in power scaling at these wavelengths, similar to that witnessed by the industry at 1.06 μm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Tankala, B. Samson, A. Carter, J. Farroni, D. Machewirth, N. Jacobson, U. Manyam, A. Sanchez, M-Y. Chen, A. Galvanauskas, W. Torruellas, and Y. Chen "New developments in high power eye-safe LMA fibers", Proc. SPIE 6102, Fiber Lasers III: Technology, Systems, and Applications, 610206 (23 February 2006);


Single-mode large-mode-area Er-Yb fiber
Proceedings of SPIE (February 27 2019)
Efficient 1.9 μm Tm3+/Yb3+-doped tellurite fibre laser
Proceedings of SPIE (October 03 2007)
Radiation effects on rare-earth doped optical fibers
Proceedings of SPIE (September 15 2010)
Thulium-doped silica fiber lasers
Proceedings of SPIE (January 01 1991)
High-power double-clad Er-doped fiber laser
Proceedings of SPIE (February 10 2011)

Back to Top