Paper
22 February 2006 Highly reliable 75W InGaAs/AlGaAs laser bars with over 70% conversion efficiency
Götz Erbert, Frank Bugge, Andrea Knigge, Ralf Staske, Bernd Sumpf, Hans Wenzel, Günther Tränkle
Author Affiliations +
Abstract
Diode lasers with a high very conversion efficiency can be obtained when carefully taken into account several partly opposed requirements for the design of the layer structure. Results are given for 940nm laser structures based on the well established InGaAs/AlGaAs material with a relatively low vertical divergence of about 45° including 95% of optical power. Laser bars were processed and mounted on passively cooled heat sinks. 73% conversion efficiency was achieved at 70W output power. 150μm stripe lasers with only 1500μm resonator length mounted on usual C-mounts have a thermal rollover of about 18W, which is a record high value for a resonator length below 2mm. Reliability tests show an excellent stability at 75W in CW and 95W in long pulse operation mode over about 10000h test time.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Götz Erbert, Frank Bugge, Andrea Knigge, Ralf Staske, Bernd Sumpf, Hans Wenzel, and Günther Tränkle "Highly reliable 75W InGaAs/AlGaAs laser bars with over 70% conversion efficiency", Proc. SPIE 6133, Novel In-Plane Semiconductor Lasers V, 61330B (22 February 2006); https://doi.org/10.1117/12.644718
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Resonators

Laser resonators

Semiconductor lasers

Waveguides

Mirrors

Reliability

Back to Top