New developments in the precessions process for manufacturing free-form, large-optical, and precision-mechanical surfaces

D. D. Walker; A. T. H. Beaucamp; V. Doubrovski; C. Dunn; R. Freeman; G. Hobbs; G. McCavana; R. Morton; D. Riley; J. Simms; X. Wei

doi:10.1117/12.674039

Translator Disclaimer

30 May 2006 New developments in the precessions process for manufacturing free-form, large-optical, and precision-mechanical surfaces

D. D. Walker, A. T. H. Beaucamp, V. Doubrovski, C. Dunn, R. Freeman, G. Hobbs, G. McCavana, R. Morton, D. Riley, J. Simms, X. Wei

Author Affiliations +

Proceedings Volume 6148, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 614805 (2006) https://doi.org/10.1117/12.674039
Event: 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2005, Xian, China

Abstract

The recent upsurge in the demand for off-axis and complex "freeform" optical surfaces is driving the development of novel processes for their fabrication. This paper focuses on recent developments of the Precessions CNC polishing process for freeform surfaces, including off-axis as a special case. First, the surface-prescription and metrology-data, and their relation to the data-input for the polishing machines, are considered. The relevance of consistent coordinate frames is emphasised. An outline of how the process can 'polish' a ground freeform part (improve the texture), and then 'figure' the part (reduce the form errors) is given. Specific experimental case-studies are then presented, illustrating the versatility of the process on different materials and forms. Recent work is included in which the process-speed has been moderated in order to remove tens of nanometres of stock material, rather then the more usual hundreds of nanometres to tens of microns as in the standard Precessions process. The relevance of this to improving the ultimate surface-precision that should be achievable by this method is described. As a final illustration, the potential of the process to the rapid fabrication of the hundreds to thousands of 1-2 metre class mirror segments required for extremely large telescopes is considered.

Citation Download Citation

D. D. Walker, A. T. H. Beaucamp, V. Doubrovski, C. Dunn, R. Freeman, G. Hobbs, G. McCavana, R. Morton, D. Riley, J. Simms, and X. Wei "New developments in the precessions process for manufacturing free-form, large-optical, and precision-mechanical surfaces", Proc. SPIE 6148, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 614805 (30 May 2006); https://doi.org/10.1117/12.674039

ACCESS THE FULL ARTICLE