Development of optimized filter for TARC and developer with the goal of having small pore size and minimizing microbubble reduction

Toru Umeda; Shuichi Tsuzuki; Mikal Boucher; Hung Dinh; L. C. Ma; Russell Boten

doi:10.1117/12.656399

29 March 2006 Development of optimized filter for TARC and developer with the goal of having small pore size and minimizing microbubble reduction

Toru Umeda, Shuichi Tsuzuki, Mikal Boucher, Hung Dinh, L. C. Ma, Russell Boten

Author Affiliations +

Proceedings Volume 6153, Advances in Resist Technology and Processing XXIII; 61534L (2006) https://doi.org/10.1117/12.656399
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

Microbubble in filtering Tetra Methyl Ammonium Hydroxide (TMAH) were counted to find the filter which generates the lowest microbubble in resist development process. Hydrophilic Highly Asymmetric Poly Aryl Sulfone (HAPAS) filter was developed and tested. The result showed that generation of microbubbles was as low as that of the Nylon 6,6 filter which had the best performance to date. Microbubbles in TARC are counted using the same method as the developer testing described above except for mainstream flow rate and the counter model. The results show that counts in the small channel could be reduced by smaller pore size filter such as conventional 0.02um rated filter. However, counts in the larger channel could be reduced by larger pore size filter such as 0.1um rated filter. Based on the above results, 0.02um rated asymmetric nylon 6,6 filter was developed. As a result, 0.02um rated asymmetric Nylon 6,6 filter achieved relatively lower count at any channel as compared to the standard 0.04um rated Nylon 6,6 filter. Nylon 6,6 filters were installed in resist as an improvement for preventive maintenance (PM) at Wafertech, L.L.C. instead of the currently used filter which has more hydrophobic membrane material. Using the Nylon 6,6 membrane, the number of defects immediately after filter change greatly decreased from 493 pcs of the more hydrophobic filter to 6 pcs/wafer, then after purging with about 250ml, the number of defects reduced within the process specification while the more hydrophobic filter had required 2L purging and 12-36 hours of PM time.

Citation Download Citation

Toru Umeda, Shuichi Tsuzuki, Mikal Boucher, Hung Dinh, L. C. Ma, and Russell Boten "Development of optimized filter for TARC and developer with the goal of having small pore size and minimizing microbubble reduction", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61534L (29 March 2006); https://doi.org/10.1117/12.656399

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available