Translator Disclaimer
Paper
23 March 2006 Synthesis of new solid polymer electrolyte and actuator based on PEDOT/NBR/ionic liquid
Author Affiliations +
Abstract
The conducting polymer actuator was presented. The solid polymer electrolyte based on nitrile rubber (NBR) activated with different ionic liquids was prepared. The three different grades of NBR films were synthesized by emulsion polymerization with different amount of acrylonitrile, 23, 35, and 40 mol. %, respectively. The effect of acrylonitrile content on the ionic conductivity and dielectric constant of solid polymer electrolytes was characterized. A conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), was synthesized on the surface of the NBR layer by using a chemical oxidation polymerization technique, and room temperature ionic liquids (RTIL) based on imidazolium salts, e.g. 1-butyl-3-methyl imidazolium X [where X= BF4-, PF6-, (CF3SO2)2N-], were absorbed into the composite film. The effects of the anion size of the ionic liquids on the displacement of the actuator were examined. The displacement increased with increasing the anion-size of the ionic liquids.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. S. Cho, H. J. Seo, J. D. Nam, H. R. Choi, J. C. Koo, and Y. Lee "Synthesis of new solid polymer electrolyte and actuator based on PEDOT/NBR/ionic liquid", Proc. SPIE 6168, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD), 61682E (23 March 2006); https://doi.org/10.1117/12.659166
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top