MEMS-based Fabry-Perot vibration sensor for harsh environments

P. M. Nieva; N. E. McGruer; G. G. Adams

doi:10.1117/12.658839

11 April 2006 MEMS-based Fabry-Perot vibration sensor for harsh environments

P. M. Nieva, N. E. McGruer, G. G. Adams

Proceedings Volume 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems; 617426 (2006) https://doi.org/10.1117/12.658839
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

This paper presents the design, fabrication and testing results of a Fabry-Perot Micro-Opto-Mechanical Device (FPMOD) used as a vibration sensor. The un-cooled high-temperature operational capability of the FPMOD provides a viable low-cost alternative to sensors that require environmentally controlled packages to operate at high temperature. The FPMOD is a passive MEMS device that consists of a micromachined cavity formed between a substrate and a top thin film structure in the form of a cantilever beam. When affixed to a vibrating surface, the amplitude and frequency of vibration are determined by illuminating the FPMOD with a monochromatic light source and analyzing the back reflected light to determine the deflection of the beam with respect to the substrate. Given the Fabry-Perot geometry, a mechanical transfer function is calculated to permit the substrate motion to be determined from the relative motion of the beam with respect to the substrate. Because the thin film cantilever beam and the substrate are approximately parallel, this convenient two-mirror cavity arrangement needs no alignment, no reference arm, and no sophisticated stabilization techniques. The small size of the FPMOD (85-175μm), the choice of materials in which it can be manufactured (Silicon Nitride and Silicon Carbide), and its simple construction make it ideal for harsh high-temperature applications. Relative displacements in the sub-nanometer range have been measured and close agreement was found between the measured sensor frequency response and the theoretical predictions based on analytical models.

Citation Download Citation

P. M. Nieva, N. E. McGruer, and G. G. Adams "MEMS-based Fabry-Perot vibration sensor for harsh environments", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 617426 (11 April 2006); https://doi.org/10.1117/12.658839

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available