Paper
9 May 2006 Strength prediction of microstructured optical fibers
Author Affiliations +
Abstract
The stresses in a microstructured optical fiber are determined in tension and in bending. A model for the failure process in porous structures with applications to weak microstructured optical fibers with large flaws is proposed. The model assumes that a continuous crack front splits on contact with a hole and then propagates such that the direction of the front in contact with the boundary of the hole is normal to it. Three-dimensional finite perturbation analysis of Bower and Ortiz1 is extended to model the interaction of cracks with a periodic array of holes. Crack propagation in the cross-section is examined using the modified finite perturbation method. Test cases are presented for the stress intensity factor distribution in elliptical cracks, and periodic perturbations in straight cracks. During crack front interaction, the front can split upon contact with the hole or an array of holes, and then travel around them.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Srinath S. Chakravarthy and Wilson K. S. Chiu "Strength prediction of microstructured optical fibers", Proc. SPIE 6193, Reliability of Optical Fiber Components, Devices, Systems, and Networks III, 61930B (9 May 2006); https://doi.org/10.1117/12.668470
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Structured optical fibers

Particles

Failure analysis

Optical fibers

Ceramics

Data modeling

Back to Top