Implications of high power losses in IR femtosecond laser inscribed fiber Bragg gratings

K. T. O'Mahoney; A. S. Main; D. J. Webb; A. Martinez; D. A. Flavin

doi:10.1117/12.662901

24 May 2006 Implications of high power losses in IR femtosecond laser inscribed fiber Bragg gratings

K. T. O'Mahoney, A. S. Main, D. J. Webb, A. Martinez, D. A. Flavin

Proceedings Volume 6193, Reliability of Optical Fiber Components, Devices, Systems, and Networks III; 61930Z (2006) https://doi.org/10.1117/12.662901
Event: SPIE Photonics Europe, 2006, Strasbourg, France

Abstract

We report on high power issues related to the reliability of fibre Bragg gratings inscribed with an infrared femtosecond laser using the point-by-point writing method. Conventionally, fibre Bragg gratings have usually been written in fibres using ultraviolet light, either holographically or using a phase mask. Since the coating is highly absorbing in the UV, this process normally requires that the protective polymer coating is stripped prior to inscription, with the fibre then being recoated. This results in a time consuming fabrication process that, unless great care is taken, can lead to fibre strength degradation, due to the presence of surface damage. The recent development of FBG inscription using NIR femtosecond lasers has eliminated the requirement for the stripping of the coating. At the same time the ability to write gratings point-by-point offers the potential for great flexibility in the grating design. There is, however, a requirement for reliability testing of these gratings, particularly for use in telecommunications systems where high powers are increasingly being used in long-haul transmission systems making use of Raman amplification. We report on a study of such gratings which has revealed the presence of broad spectrum power losses. When high powers are used, even at wavelengths far removed from the Bragg condition, these losses produce an increase in the fibre temperature due to absorption in the coating. We have monitored this temperature rise using the wavelength shift in the grating itself. At power levels of a few watts, various temperature increases were experienced ranging from a few degrees up to the point where the buffer completely melts off the fibre at the grating site. Further investigations are currently under way to study the optical loss mechanisms in order to optimise the inscription mechanism and minimise such losses.

Citation Download Citation

K. T. O'Mahoney, A. S. Main, D. J. Webb, A. Martinez, and D. A. Flavin "Implications of high power losses in IR femtosecond laser inscribed fiber Bragg gratings", Proc. SPIE 6193, Reliability of Optical Fiber Components, Devices, Systems, and Networks III, 61930Z (24 May 2006); https://doi.org/10.1117/12.662901

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available