Paper
27 June 2006 Resonant electro-optical modulator for high laser-power single-mode fiber relay
W. Hackenberg, M. Zaehringer, A. Silber
Author Affiliations +
Abstract
We describe the design and performance of a resonant electro-optical modulator, based on stoichiometric lithium tantalate, capable of handling high optical powers and providing a large modulation depth. This phase modulator is part of the single-mode fiber relay used in the ESO VLT Laser Guide Star Facility for adaptive optics to transport 589-nm laser light from the PARSEC dye laser installed in the laser clean room to the laser launch telescope. The purpose of the phase modulator is to broaden the single-frequency PARSEC laser linewidth before the laser light is injected into the single-mode relay fiber. By this the power handling capability of the single-mode fiber is increased by a factor of 3 or 10 W of in-coupled power at 589 nm, while maintaining the excitation efficiency of the mesospheric sodium D2 transition.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. Hackenberg, M. Zaehringer, and A. Silber "Resonant electro-optical modulator for high laser-power single-mode fiber relay", Proc. SPIE 6272, Advances in Adaptive Optics II, 62724D (27 June 2006); https://doi.org/10.1117/12.673190
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulators

Crystals

Fiber lasers

Relays

Electrooptic modulators

Laser guide stars

Electro optics

Back to Top