Investigation of planar switches for large format CMB polarization instruments

Paul K. Grimes; Ghassan Yassin; Leonid S. Kuzmin; Phillip D. Mauskopf; Ernst Otto; Michael E. Jones; Chris E. North

doi:10.1117/12.671151

27 June 2006 Investigation of planar switches for large format CMB polarization instruments

Paul K. Grimes, Ghassan Yassin, Leonid S. Kuzmin, Phillip D. Mauskopf, Ernst Otto, Michael E. Jones, Chris E. North

Proceedings Volume 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III; 627525 (2006) https://doi.org/10.1117/12.671151
Event: SPIE Astronomical Telescopes + Instrumentation, 2006, Orlando, Florida , United States

Abstract

Several technologies are now being considered for modulating the polarization in various B-mode instruments, including rotating quasioptical half-wave plates in front of the focal plane array, rotating waveguide half-wave plates and Faraday rotators. It is not at all clear that any of these techniques is feasible without heavy penalty in cost or performance. A potentially much more efficient method is to use a pseudo-correlation polarimeter in conjunction with a planar circuit phase switch. We investigate three different devices for use as mm-wave switches, SIS tunnel junctions, capacitively coupled superconducting nanostrips and RF MEMS. The SIS tunnel junction switches operate by switching between two different bias voltages, while the nanostrip switch operates by changing the impedance of a resonant circuit by driving the nanostrip from the superconducting to normal state. In each case the RF signal sees two substantially different complex impedance states, hence could be switched from one transmission line branch to another. In MEMS this is achieved by mechanical movement of one plate of a parallel plate capacitor system. Although RF MEMS have been reported at high microwave and low mm-wave frequencies, in this work we have investigated cryogenic MEMS for operation at high mm-wave frequencies (225 GHz) using superconducting transmission lines. We present and compare designs and simulations of the performance of phase switches based on all three switching technologies, as well as preliminary experimental results for each of the switches. Finally we also present designs of phase shift circuits that translates the on/off switching into phase modulation.

Citation Download Citation

Paul K. Grimes, Ghassan Yassin, Leonid S. Kuzmin, Phillip D. Mauskopf, Ernst Otto, Michael E. Jones, and Chris E. North "Investigation of planar switches for large format CMB polarization instruments", Proc. SPIE 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III, 627525 (27 June 2006); https://doi.org/10.1117/12.671151

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available