You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
11 January 2007Spectral analysis of pulse-width jitter of optical pulse trains
We propose a technique for measuring the pulse width jitter of high repetition rate optical pulse trains. The technique is
based on spectral measurement of three different harmonics of the detected pulse train. The simulation results show that
the pulse width jitter would contribute a great amount of noise power to the total noise power when the product of pulse
width and angular frequency is larger than 1. We apply the proposed technique to characterize noise of a Fabry-Perot
Laser Diode. The pulse width jitter is estimated to be 2.3ps. Compared with the calculated 1.8% amplitude noise and
5.1ps timing jitter, the pulse width jitter is found not to be negligible.
Yun-cai Wang andJun-hua Tang
"Spectral analysis of pulse-width jitter of optical pulse trains", Proc. SPIE 6279, 27th International Congress on High-Speed Photography and Photonics, 627926 (11 January 2007); https://doi.org/10.1117/12.725220
The alert did not successfully save. Please try again later.
Yun-cai Wang, Jun-hua Tang, "Spectral analysis of pulse-width jitter of optical pulse trains," Proc. SPIE 6279, 27th International Congress on High-Speed Photography and Photonics, 627926 (11 January 2007); https://doi.org/10.1117/12.725220