Paper
5 September 2006 Tilted logpile photonic crystals using the LIGA technique
Author Affiliations +
Abstract
The LIGA microfabrication technique offers a unique method for fabricating 3-dimensional photonic lattices based on the Iowa State "logpile" structure. These structures represent the [111] orientation of the [100] logpile structures previously demonstrated by Sandia National Laboratories. The novelty to this approach is the single step process that does not require any alignment. The mask and substrate are fixed to one another and exposed twice from different angles using a synchrotron light source. The first exposure patterns the resist at an angle of 45 degrees normal to the substrate with a rotation of 8 degrees. The second exposure requires a 180 degree rotation about the normal of the mask and substrate. The resulting pattern is a vertically oriented logpile pattern that is rotated slightly off axis. The exposed PMMA is developed in a single step to produce an inverse lattice structure. This mold is filled with electroplated gold and stripped away to create a usable gold photonic crystal. Tilted logpiles demonstrate band characteristics very similar to those observed from [100] logpiles. Reflectivity tests show a band edge around 5 μm and compare well with numerical simulations.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. D. Williams, C. Arrington, W. C. Sweatt, D. W. Peters, I. El-Kady, A. R. Ellis, J. Verley, and F. B. McCormick "Tilted logpile photonic crystals using the LIGA technique", Proc. SPIE 6289, Novel Optical Systems Design and Optimization IX, 62890A (5 September 2006); https://doi.org/10.1117/12.681214
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photonic crystals

Photomasks

Gold

Polymethylmethacrylate

Lithography

Reflectivity

X-rays

RELATED CONTENT

Advanced X-Ray Alignment System
Proceedings of SPIE (June 30 1986)
Fabrication of 3D photonic crystal by deep x-ray lithography
Proceedings of SPIE (January 23 2006)
Focused two-dimensional antiscatter grid for mammography
Proceedings of SPIE (November 21 2002)
Zone plate for x-ray applications
Proceedings of SPIE (January 05 2001)

Back to Top