Paper
29 August 2006 Positioning errors of pencil-beam interferometers for long trace profilers
Author Affiliations +
Abstract
We analyze the random noise and the systematic errors of the positioning of the interference patterns in the long trace profilers (LTP). The analysis, based on linear regression methods, allows the estimation of the contributions to the positioning error of a number of effects, including non-uniformity of the detector photo-response and pixel pitch, read-out and dark signal noise, ADC resolution, as well as signal shot noise. The dependence of the contributions on pixel size and on total number of pixels involved in positioning is derived analytically. The analysis, when applied to the LTP II available at the ALS optical metrology laboratory, has shown that the main source for the random positioning error of the interference pattern is the read-out noise estimated to be ~0.2 μrad. The photo-diode-array photo-response and pixel pitch non-uniformity determine the magnitude of the systematic positioning error and are found to be ~0.3 μrad for each of the effects. Recommendations for an optimal fitting strategy, detector selection and calibration are provided. Following these recommendations will allow the reduction of the error of LTP interference pattern positioning to a level adequate for the slope measurement with 0.1-μrad accuracy.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valeriy V. Yashchuk "Positioning errors of pencil-beam interferometers for long trace profilers", Proc. SPIE 6317, Advances in X-Ray/EUV Optics, Components, and Applications, 63170A (29 August 2006); https://doi.org/10.1117/12.677956
Lens.org Logo
CITATIONS
Cited by 22 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Error analysis

Personal digital assistants

Sensors

Interference (communication)

Interferometers

Signal detection

Calibration

Back to Top