Paper
26 April 2007 Modification studies of polyethylene by multi-ion implantation by laser ion source
Vincenzo Nassisi, Lorenzo Torrisi, Annamaria Visco, Antonella Lorusso, Luciano Velardi, Giuseppe Caretto, Fabio Belloni, John Beltrano, Nino Campo
Author Affiliations +
Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 634638 (2007) https://doi.org/10.1117/12.739344
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria
Abstract
A UV pulsed lasers was employed to produce C and Ti ions of different charge with current densities of the order of 10 mA/cm2. A post ion acceleration, up to 30 kV, was employed to increase the ion energy and to implant polyethylene biocompatible surfaces up to a depth of about 200 nm. Preliminary results about surface properties indicate that implanted surfaces have higher wetting and micro-hardness with respect to un-implanted ones.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vincenzo Nassisi, Lorenzo Torrisi, Annamaria Visco, Antonella Lorusso, Luciano Velardi, Giuseppe Caretto, Fabio Belloni, John Beltrano, and Nino Campo "Modification studies of polyethylene by multi-ion implantation by laser ion source", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 634638 (26 April 2007); https://doi.org/10.1117/12.739344
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Polymers

Ion lasers

Ion implantation

Ultraviolet radiation

Pulsed laser operation

Carbon

Back to Top