Inspectability and printability of lines and spaces halftone masks for the advanced DRAM node

Arndt C. Dürr; Karsten Gutjahr; Jan Heumann; Martin Stengl; Frank Katzwinkel; Andreas Frangen; Thomas Witte

doi:10.1117/12.693061

20 October 2006 Inspectability and printability of lines and spaces halftone masks for the advanced DRAM node

Arndt C. Dürr, Karsten Gutjahr, Jan Heumann, Martin Stengl, Frank Katzwinkel, Andreas Frangen, Thomas Witte

Proceedings Volume 6349, Photomask Technology 2006; 63493O (2006) https://doi.org/10.1117/12.693061
Event: SPIE Photomask Technology, 2006, Monterey, California, United States

Abstract

With decreasing pattern sizes the absolute size of acceptable pattern deviations decreases. For mask-makers a new technology requires a review, which mask design variations print on the wafer under production illumination conditions and whether these variations can be found reliably (100%) with the current inspection tools. As defect dispositioning is performed with an AIMS-tool, the critical AIMS values, above which a defect prints lithographically significant on the wafer, needs to be determined. In this paper we present a detailed sensitivity analysis for programmed defects on 2 different KLA 5xx tools employing the pixel P90 at various sensitivity settings in die-to-die transmitted mode. Comparing the inspection results with the wafer prints of the mask under disar illumination it could be shown that all critical design variations are reliably detected using a state-of-the-art tool setup. Furthermore, AIMS measurements on defects with increasing defect area of various defect categories were taken under the same illumination conditions as for the wafer prints. The measurements were evaluated in terms of AIMS intensity variation (AIV). It could be shown that the AIMS results exhibit a linear behavior if plotted against the square-root area (SRA) of the defects on the mask as obtained from mask SEM images. A consistent lower AIV value was derived for all defect categories.

Citation Download Citation

Arndt C. Dürr, Karsten Gutjahr, Jan Heumann, Martin Stengl, Frank Katzwinkel, Andreas Frangen, and Thomas Witte "Inspectability and printability of lines and spaces halftone masks for the advanced DRAM node", Proc. SPIE 6349, Photomask Technology 2006, 63493O (20 October 2006); https://doi.org/10.1117/12.693061

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Photomasks

Inspection

Semiconducting wafers

Printing

Critical dimension metrology

Scanning electron microscopy

Manufacturing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years